Hardware Setup; System Requirements - ION ion4i User Manual

2x2 Indoor & Outdoor Access Points
4

Hardware Setup

4.1

System Requirements

Before installing the access point, make sure that your system includes the following:
1. 10/100/1000 Mbps local area network device such as a hub or switch.
2. The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the package, or one
like it.
3. We can power up the device through PoE adaptor which should be 803at/af compliant. A 100–240 V, 50–60
Hz AC power source.
4. A web browser to configure the devices.
5. At least 802.11b/g-compliant devices.
CONFIDENTIA L
Revision: A0-00
20