General Network Interface Setup Configuration; Figure 19: Basic Overview Of The Network Interface Setup Configuration Screen To Switch Protocol; Table 11: List Of Actions To Switch Protocol - ION ion4i User Manual

2x2 Indoor & Outdoor Access Points
10.1.1

General Network interface setup configuration

The default IP address of the access point is set to 192.168.1.1. The user can change the current static IP address of
the device from this screen. DHCP client (DHCP client or DHCPv6 client) option is to get the dynamic IP address
from reachable DHCP server in the network. Once the protocol is set to DHCP client or DHCPv6 client, the device
will automatically get the IP address (IPv4 or IPv6) from the DHCP server.
Click on the "Edit" option in interface screen as shown in "Figure 18: Basic overview of the interface configuration
screen". A basic overview of the network interface setup configuration screen to switch protocol is given below:

Figure 19: Basic overview of the network interface setup configuration screen to switch protocol

Follow the steps given below to switch protocol:
Callout Name
1.
General Setup
2.
Protocol
3.
Really switch protocol

Table 11: List of actions to switch protocol

Description
Click on "General Setup" option
Select the protocol desired protocol from the dropdown list
(Static address/DHCP client/DHCPv6 client)
Click on "Switch protocol" to confirm the protocol switch
CONFIDENTIA L
Revision: A0-00
39