Compatible Equipment; Upgrades; Pcb Board Type Supported By Software Version 4.30 And Later - Honeywell Notifier NFN-GW-EM-3 Installation And Operation Manual

Compatible Equipment

1.9 Compatible Equipment
The NFN-GW-EM-3 is compatible with the following equipment.
Type
Fire Panels:
Network Cards:
Workstation:
Other Products:

1.10 Upgrades

When upgrading old versions of the NFN Gateway, use the "Download Utility" that is installed along with the workstation software.
Proceed as follows:
1. In Windows 10, go to Windows Start Menu > All apps > Facilities Monitoring > Download Utility.
2. Enter the gateway IP address.
3. Click the File Name field. An Open dialog box displays containing the archive files installed on the workstation PC.
4. Select appropriate archive file from the list. The archive file name information is described in
(Upgrade Firmware).
5. Click Open.

1.11 PCB Board Type Supported by Software Version 4.30 and Later

Software version 4.30 and later does not support EMPCA board types. Only EMPCB board types are supported.
NFN-GW-EM-3 Installation and Operation Manual — P/N LS10017-000NF-E:D1 5/1/2019
Table 1.1 Compatible Equipment
• NFS-320
• NFS2-640
• NFS2-3030
• NCM-W, NCM-F
• HS-NCM-W, HS-NCM-SF, HS-NCM-MF, HS-NCM-WSF, HS-NCM-WMF, HS-NCM-MFSF
• ONXYWORKS-WS
• BACNET-GW-3
• CAP-GW
• DVC
• FIRSTVISION
• LEDSIGN-GW
• MODBUS-GW
• NCA-2
• NCD
• NWS-3
• VESDA-HLI-GW
Equipment
Table 3.1, "Main Menus"
Product Overview
13