Threading End/ Unthreading End Mode - Sony DVW-250 Maintenance Manual

6-1. General Information for Mechanical Part Replacement

6-1-2. Threading End/ Unthreading End Mode

1. Threading end mode
Threading end mode means that the S and T sliders move from around the reel tables
to both sides of the drum, and stop at the cut portions like a V of the catchers S and T.
And the S drawing arm and T dawing arm are fixed at the portion that shown in
folloing figure.
(1) To enter the threading end mode with a tape
• Insert a cassette tape into the cassette compartment.
• Close the front lid.
S drawing arm
(2) To enter the threading end mode without a tape
n
When no cassette is in the cassette compartment, do not turn the red gear on
the left of the cassette compartment.
• Turn the power off.
• Remove the top panel.
• During pushing the T reel brake release lever, turn the manual eject gear
clockwise as far as it will go while pushing it downward.
Red gear
6-2
Cacher S Cacher T T drawing arm
T reel brake release
lever (red label)
Manual eject gear
(red)
Cassette
compartment
DVW-250/250P