Section 6
Replacement of Mechanical Parts
6-1. General Information for Mechanical Part Replacement
6-1-1. Caution
1. Tape cleaner
n
Never touch the tape cleaner installed at the entrance head assembly with bare
hands. It is danger of cutting your finger because the tape cleaner has a sharp edge.
Tape cleaner
2. Tool
• Before using a tool be sure to clean its surface.
• Cleaning piece : 2-034-697-00
• Cleaning fluid : 9-919-573-01
• Pay careful attention to do not damage the tool.
If the tool is damaged, the adjustment can not correctly carry out.
6-1
DVW-250/250P