Advertisement
Quick Links
CYTVII-B-E-1M-176-CPU QUICK START GUIDE
Please note that Cypress is an Infineon Technologies Company.
The document following this cover page is marked as "Cypress" document as this is the
company that originally developed the product. Please note that Infineon will continue
to offer the product to new and existing customers as part of the Infineon product
portfolio.
Continuity of document content
The fact that Infineon offers the following product as part of the Infineon product
portfolio does not lead to any changes to this document. Future revisions will occur
when appropriate, and any changes will be set out on the document history page.
Continuity of ordering part numbers
Infineon continues to support existing part numbers. Please continue to use the
ordering part numbers listed in the datasheet for ordering.
www.infineon.com
Advertisement
Related Manuals for Infineon TRAVEO II
Summary of Contents for Infineon TRAVEO II
- Page 1 The document following this cover page is marked as “Cypress” document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio.
- Page 2 CYTVII-B-E-1M-176-CPU QUICK START GUIDE TRAVEO II CPU BOARD Kit Contents: 1. Traveo II CPU Board CYTVII-B-E-1M-176-CPU REV.C 2. Type-B Mini USB Cable 3. 12 V AC-DC Universal Power Adapter 4. Quick Start Guide (this document)
- Page 3 • Ensure that jumpers J23(Pin 1 & 2), J5, J6, J8, J9, and J10, Insert a Traveo II Device into the IC socket (U4), are shorted. Connect the 12V adapter to the Power Jack J3. align Pin 1 with the arrow mark near C16 and close the socket cover.
- Page 4 TRAVEO II CPU BOARD Instructions: • The Traveo II CPU Board, can be used standalone to evaluate limited features of the Traveo II MCU. • The board can be used with the Traveo II Body Controller Base Board, to evaluate all features of the MCU.
- Page 5 22. SW3 – User Button 7. UART-USB Tx LED 23. J14 – Jumper for User Button 8. UART-USB Rx LED 24. U4 – Cypress Traveo II MCU 9. Cypress USB-Serial Controller 25. MCU Reset Button (SW2) 10. USB Type-B Mini Connector 26.