elero VariEasy M10 SH Operating And Assembly Instructions Manual

Roller shutter drive VariEasy SH
Contents
Operating and
1
assembly instructions
2 General information on these instructions
2.1 Standards and guidelines
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service provided by the manufacturer 2
3 Safety
3.1 General safety instructions
3.2 Layout of safety instructions
4 Product description
4.1 Product contents
4.2 Accessories
5 Assembly
5.1 Mechanical fastening
5.2 Electrical connection
5.3 Connection example VariEasy SH 230 V / 50 Hz 5
5.4 Adjustment of the end positions
5.4.1 Upper end position (position 0)
5.4.2 Lower end position (position 1)
5.4.3 Different installation situations
5.4.4 Checking the end positions
6 Troubleshooting
7 Servicing
8 Repairs
9 Manufacturer's address
10 Disassembly and disposal
11 EU Declaration of Conformity
12 Technical data and dimensions
12.1 VariEasy M SH
Roller shutter drive VariEasy SH
1 Operating and assembly instructions
1
Follow these operating and assembly instructions for safe
and proper use. Incorrect assembly can lead to serious
1
injuries. Keep these instructions.
The German operating instructions are the
1
original version.
1
All documents in other languages are translations of the
original version.
2
All rights reserved in the case of patent, utility model or
2
design registrations.
2 General information on these instructions
The content structure is based on the life cycles of the
2
tubular motor (hereinafter referred to as "the product").
2
The manufacturer reserves the right to make changes to
the technical data in these operating instructions. In some
2
cases, this technical data may differ from those of the
respective product version; however, the functional informa-
3
tion will not undergo significant changes or become invalid.
The current version of the technical specifications may be
3
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of this
3
provision. Deviations from textual or visual statements may
occur depending on the product's technical development,
3
features and accessories. Deviating information for special
versions will be provided by the manufacturer in the sales
4
documentation. Other information shall remain unaffected
by these provisions.
4
2.1 Standards and guidelines
During construction, the fundamental health and safety
requirements were applied and provision was made for the
5
appropriate legislation, standards, directives and guidelines.
5 The safety of the product is confirmed by the declaration
of conformity (see EC Declaration of Conformity). All in-
5
formation relating to safety in these operating instructions
refers to the laws and regulations that are currently valid in
5
Germany. All information in these operating and assembly
instructions must be complied with at all times and without
6
limitation. In addition to the safety notes in these instruc-
tions, the regulations on accident prevention, environmental
6
protection and occupational health and safety applicable at
the location of use must be observed and adhered to.
6
The regulations and standards for safety assessment
can be found in the EC Declaration of Conformity.
6
2.2 Intended use
6
The product is intended for use in shading and sun
protection systems, such as roller shutters, awnings,
6
external/venetian blinds and similar systems.
7
The elero calculation program
www.elero.com/drive-calculation/
7
is vital for defining the drive.
Further applications must be agreed upon in advance with
7
the manufacturer.
The plant operator shall be solely responsible for any
damages arising from the improper use of this product.
The manufacturer cannot be held liable for personal or
material damages caused by misuse or procedural
errors, nor by improper operation or commissioning.
The product may only be operated by an instructed and au-
thorised specialist operator while observing all safety notes.
138207601_EN_0221