Table of Contents
Advertisement
Installing WaveformCreator
Silent Installation of Waveform Creator
To install Waveform Creator silently, perform the following steps:
1. Copy the following file to a non read-only directory.
* Keysight_M9099_3-2_Setup.exe
2. Run the command prompt as an administrator.
3. Navigate to the directory in which the M9099 Setup file is located.
4. Run the following command:
Keysight_M9099_3-2_Setup.exe /s /v /qn
Keysight M9099 Waveform Creator 3.2 Startup Guide
17
Advertisement
Table of Contents
