Amp Board Block-1 - Sony STR-ZA5000ES Service Manual

STR-ZA5000ES

2-22. AMP BOARD BLOCK-1

• Continued on 2-23 (page 27).
6 ANALOG board cable
connector (CN501)
7 HEIGHT_P-TR board
cable connector
(CN886)
5 SPTM board
cable connector
(CN921)
4 Remove the wire
from two lead pins.
(See Fig. K)
AMP board
lead pin
Release the distance
between the cable.
lead pin
AMP board
SPTM board
26
3 Cut the cable tie.
(See Fig. L)
(See Note)
CN521
Push.
Push.
cable tie
3 Cut the cable tie.
(See Fig. L)
(See Note)
2 Remove the wire
from the lead pin.
(See Fig. L)
9 main power transformer cable
connector (CN901)
front side
CN886
HEIGHT_P-TR board
lead pin
CN921
lead pin
Note: During reassembly, use new cable
ties to fasten the wires back in place
as they were before disassembly.
3 Cut the cable tie.
(See Fig. L)
(See Note)
8 ANALOG board
cable connector
(CN550)
1 Remove the wire
from two lead pins.
(See Fig. M)
front side
lead pin
AMP board
SPTM board