Table of Contents
Advertisement
NOTICE
It is necessary to prime the Hose with liquid
to run the sprayer. Do not run the sprayer
dry, it will cause damage to the pump.
4.
Prime the ProPack as follows:
a.
Hold ProPack Adapter and Hose
below ProPack Tank. Point into
waste bucket.
NOTE: Hose cannot be over shoulder or
hooked through backpack strap during
priming process.
b.
Turn Valve Handle
counter-clockwise to open position.
c.
Allow fluid to flow from Sprayer
Adapter for 5 seconds.
3A8304B
d.
Turn Valve Handle clockwise to
closed position.
5.
Remove Pump Filter from sprayer.
6.
Connect ProPack to sprayer as follows:
a.
Align Valve Handle with Prime
Knob on sprayer.
b.
Push Sprayer Adapter onto the
sprayer. Twist to lock.
Start Up
5
Advertisement
Table of Contents
