Contents; Trademarks - Sony SIU-100 Service Manual

Contents

Trademarks

6
This service manual is organized by following sections.
Section 1 Service Overview
Explains the installation, location of main parts, removal of cabinet, replacement of
the main parts, using the extension board and self-diagnosis etc..
Section 2 Electrical Alignment
Explains the electrical alignment for the maintenance of this unit.
Section 3 Spare Parts
This section describes the exploded views and mechanical parts list and the electri-
cal parts list of each board.
Section 4 Semiconductor Pin Assignments
This section describes information on semiconductors used for the unit.
It includes a complete list of the semiconductors and their ID Nos. for retrieving
information on "Semiconductor Pin Assignments" CD-ROM, which is available
separately.
Please refer to this section together with the "Semiconductor Pin Assignments" CD-
ROM.
Information on the semiconductors not contained in the CD-ROM at the time of
issue of this manual, if any, is given in this section as well.
Section 5 Block Diagrams
This section describes the circuit description and the block diagrams of each board.
Section 6 Board Layouts
This section describes the board layouts for the unit.
Section 7 Schematic Diagrams
This section describes the schematic diagrams and frame wiring for the unit.
Trademarks and registered trademarks used in this manual are follows.
. ADAT is the registered trademark of the interface of ALESIS STUDIO
ELECTRONICS, INC.
. TDIF is the trademark of the interface of TEAC Corporation.
. Unless otherwise specified, all names of companies and products are trademarks or
registered trademarks of the respective companies.
SIU-100/100T