Baracoda D-Fly Programming Manual page 9

The "No duplicate scan" option has been developed for users who do not want to scan the same barcode
twice.
If the same barcode is scanned, an error signal is played (two beeps (lower tone) and a red
If the same barcode is trying to be scanned, it won't be. The laser beam will still be enlightening.
D-Fly – Programming Guide v1.5
« no duplicate scans » disabled (*)
« no duplicate scans » enabled + error signal
enlightening of the led)
« no duplicate scans » enabled + no decoding
Data Capture
for Workforce
in Motion
- 9 -