Front Glass Installation / Removal; Maintenance - Napoleon TriVista NEFB50H-3SV Installation And Operation Manual

finishing
EN
6.3

front glass installation / removal

1. Place the front glass into the track located inside the firebox (Fig. 6-5).
2. Tilt the front glass forward (Fig. 6-6).
3. Secure the flathead screws (supplied) through the bracket holes (Fig. 6-7).
4. Reverse these steps to remove the front glass.

7.0 maintenance

WARNING
!
• Always disconnect the power and allow the electric appliance to cool before performing any cleaning,
maintenance or relocation of this electric appliance. Turn controls to OFF and remove plug from outlet or turn off
the house circuit breaker to electric appliance receptacle.
• Never vacuum hot embers.
• This appliance will require maintenance which should be planned on an annual basis.
• Using a vacuum with a soft brush attachment, gently remove any lint, dirt, or debris from the control areas and
the vent openings on the appliance.
• For glass media, follow the installation instructions for pre-cleaning.
• The front glass can be cleaned with glass cleaner and using a non-abrasive cloth (supplied).
26
W415-1953 / C / 03.04.21
Track
Front Glass
Fig. 6-5
Underside View
of Front Glass
Bracket
note:
NEFB60H-3SV illustrated above.
B x 3 (NEFB50H-3SV)
B x 4 (NEFB60H-3SV)
Fig. 6-7
24.2
Fig. 6-6