Finishing; Finishing Materials; Screw-Safe Areas - Napoleon TriVista NEFB50H-3SV Installation And Operation Manual

WARNING
!
• Risk of fire!
• Never obstruct the front opening of the appliance.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed or cracked.
• Facing and/or finishing material must never overhang into the appliance opening.
• Do not finish past the finishing edge trim. Installing finishing materials past the finishing edge trim will result
in not being able to install and/or open and close the front glass panel.
• Drywall dust may penetrate into the blower bearings, causing irreparable damage. Care must be taken to
prevent drywall dust from coming into contact with the blower or its compartment. Any damage resulting from
this condition is not covered by the warranty policy.
6.1

finishing materials

6.1.1 screw-safe areas

Screw-safe area with max. 1" (25mm) long
screw. Do not screw more than 1/2"
(12mm) into appliance.
DO NOT SCREW IN THE RESTRICTED AREA AS THIS COULD DAMAGE
THE INTERNAL COMPONENTS OF THE APPLIANCE, WHICH CAN CAUSE THE
NEFB50H-3SV Illustrated
NEFB60H-3SV Illustrated
APPLIANCE TO MALFUNCTION.
Max. 1/2"
Display
Panel
Display
Panel
Restricted screw area.
Do not screw in this area.

6.0 finishing

Appliance
Finishing
Material
(12mm)
Inside Outside
Appliance Appliance
W415-1953 / C / 03.04.21
EN
23