Operating Instructions; Operating Control Panel - Napoleon TriVista NEFB50H-3SV Installation And Operation Manual

5.0 operating instructions

EN
WARNING
!
• Ensure the house circuit breakers for the power supply are turned on. When initially connecting the appliance to
a power source, the appliance will make a beeping sound to indicate standby mode.
This appliance is equipped with two blower and heater assemblies. One is in use for 120V,
5.1

operating control panel

note:
This appliance is equipped with a motion sensor. The display panel will turn on
when it detects motion within 8" (200mm) below the touch control panel.
Power
Temperature
Control
Timer
Heater
Control
Blue Flame
Orange Flame
20
W415-1953 / C / 03.04.21
Once the appliance has been hard-wired
to a dedicated 120V / 240V power supply, it is ready to operate.
whereas two are in use for 240V.
Turns the appliance on / off.
Controls appliance temperature.
Settings:
18°C (64°F), 19°C (66°F), 20°C (68°F), 21°C (70°F), 22°C (72°F),
23°C (74°F), 24°C (76°F), 25°C (78°F), 26°C (80°F), 27°C (82°F)
and OFF.
NOTE: When setting °C or °F, the temperature control is OFF.
Holding the button for 5s will switch the temperature from °C
to °F or vice versa.
Turns the timer on / off.
Settings:
0 (--), 30 min., 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h
Turns the heater and blower on / off.
Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Low heat
H2 - High heat
NOTE: Heater function can be disabled/enabled by holding
the button for 5s. When the heater function is disabled, the
"LO" will be displayed.
Controls flame brightness.
Settings:
F0 - Flame off
F1 - Small flame
F2 - Medium flame
F3 - Bright flame
F4 - Brightest flame