Tenda S108 User Manual

Tenda S108 User Manual

5/8/16/24 ports fast ethernet switch
Hide thumbs Also See for S108:

Advertisement

5/8/16/24 Ports
F a s t E t h e r n e t S w i t c h
User's Guide
VER:1.0

Advertisement

Table of Contents
loading

Summary of Contents for Tenda S108

  • Page 1 5/8/16/24 Ports F a s t E t h e r n e t S w i t c h User’s Guide VER:1.0...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1 INTRODUCTION 1.1 Unpacking….…………………….. 2 1.2 Front Panel. ………….…………... 2 1.3 Rear Panel .………….….………... 1.4 LED Indicators.….…………….…. 2 1.5 Features…………….……….……. 3 2 PERFORMANCE FEATURES 2.1 Performance Features………….…. 5 3 INSTALLATION 3.1 Installation……………….….……. 6 3.2 SWITCH to PC…..…..…..….. HUB(SWITCH) With UP Link (MDI-II) to switch…...
  • Page 3: Introduction

    1 INTRODUCTION 1.1 Unpacking Open the box and carefully unpacks its contents. The box should contain the following items:  One Switch  4 rubber pads  One external power adapter (only 5/8 ports switch)  User’s Guide. If any item is found missing or damaged, please contact your dealer for replacement.
  • Page 4: Features

    Indicat Color Status Description This indication Green Light op when the Switch is turned on If this indicator is not light, check the POWE AC power connector to — Extinguish ensure proper insertion of the power cord and the power switch is turned on.
  • Page 5: Performance Features

    possible packet loss. The 5/8/16/24 ports switch can detect 10M/100M and full duplex/half duplex mode. The 5/0/16/24 ports switch is not a managed switch, but it is very easy to use, and accelerate small Ethernet workgroup bandwidth. 2 PERFORMANCE FEATURES 1、...
  • Page 6: Installation

    2.1 Performance Features Generally features IEEE802.3 10BASE-T Ethernet IEEE802.3u 100BASE-TX/FX Fast Criterion Ethernet IEEE802.3 frame type:Translucent CSMA/CD Protocol Ethernet: Fast Ethernet: 10Mbps(semi 100Mbps(semi Data duplex) duplex) transfer 20Mbps(full 200Mbps(full Duplex) duplex) Star-network Topologica l structure 10BASE-T: 2-pair UTP Cat3, 4,5(100m) Network EIA/TIA-568 100-ohm STP (100m) Twisted-pa...
  • Page 7: Switch To Pc

     Check power supply is confirmed the safe Connection.  Affirms to have the ventilation that is enough, can be very good dissipates heat. Not lay up the heavy object on switch. Desktop Installation When on the top of a table installing the switch, the rubber pad of equipment bottom touches ground first.
  • Page 8 HUB to Switch The switch can link with the hub (switch) by way of two (UTP/STP) straight cables twisting of a 3,4,5 and the connection is accomplished from the hub uplink (MDI-II) port to any of the 5/8/16/24 ports switch (MDI-X) ports.
  • Page 9 1 2 3 4 5 6 7 8 8 7 6 5 4 3 The standard RJ-45 receptacle/connector RJ-45 Connector pin assignment Contact Contact Tx + (Transmit) Tx - (Transmit) Rx + (receive) Not used Not used Rx - (receive) Not used Not used The standard cable, RJ-45 pin assignment...

Table of Contents