Harken T2 Instructions

USA – Tel: (+01) 262-691-3320 • Web: www.harken.com • Email: harken@harken.com
Italy – Tel: (+39) 031.3523511 • Web: www.harken.it • Email: techservice@harken.it
Strictly follow all instructions to avoid an accident, damage to your vessel, personal injury or
death. See www.harken.com for additional safety information.
Part
No. Description
2148 40 mm
2151 57 mm
Part
No. Description
2148 40 mm
2151 57 mm
Important information on choosing line, knots and splices. Go to US Sailing article:
http://offshore.ussailing.org/Assets/Offshore/SAS/PDF/Dyneema+Article.pdf
Loop Only to Objects with Rounded Edges. Avoid sharp corners.
WARNING! Loop can cut easily on sharp corners causing loop to break suddenly under load,
possibly causing an accident, damage to your vessel, personal injury or death. See www.
harken.com for additional safety information.
I N S T R U C T I O N S
T2 Loop Blocks

Features

Sheave spins on ball bearings: low friction
No metal: inside or out.
Quick attachment: using loop.
Sheave Replacement
Ø Loops /Lines
40 mm
57 mm

Planning Installation

CORRECT
Rounded
2148, 2151
Sheave

Specifications

Max line
Sheave
Ø in
40 mm /
3
8
57 mm /
7
16

Replacement Loops

Replacement line
Ø
in
2154 /
1
8
2155 /
1
8
INCORRECT
Loop
Maximum
Ø working load
mm lb
10 485
10 792
Loop
length
mm in mm
3 5 / 140
1
2
3 6 / 165
1
2
Sharp
Terms
Bail
Head
Anchor Post
Mouth
Breaking
load
kg lb kg
220 1200 544
359 2380 1080
Line
Type
Spectra
Spectra