Using Apple Carplay - Mazda Connect Manual

2. Located on front console
The location of the USB port differs depending on the vehicle model.
NOTE
®
When an iPhone connected to Bluetooth

the system switches to Apple CarPlay™. Applications that you were using when
connected to Bluetooth
be used with a Bluetooth
Apple CarPlay™ differ depending on the application.
(U.S.A./Canada)

Mobile 911 can be activated even when connected to Apple CarPlay™. When
using Apple CarPlay™ again after activating Mobile 911, you need to disconnect
the connector cord from the USB port and then reconnect it.
®
Up to 5 iPhone devices can be registered as devices connected to Apple

CarPlay™.
When setting the Device Connection Status of a connected iPhone

Enabled", Apple CarPlay™ will not activate even if your iPhone
vehicle's USB terminal. When you want to use Apple CarPlay™, change the setting.
Refer to Connectivity Settings on page 2-126.
Connecting Apple CarPlay™ for the first time
When connecting Apple CarPlay™ for the first time, a confirmation screen
concerning Apple CarPlay™ activation is displayed.
Always Enable: Enables Apple CarPlay™ each time without a confirmation.
Never Enable: Disables the currently connected device hereafter.
Enable Once: Enables the device only this time.
Cancel: Disables the device this time.
NOTE
If you select "Enable Once", the confirmation screen is displayed again the next time
the engine is started.
However, if the interval between stopping and starting the engine is short, the
confirmation screen may not be displayed.
®
is connected to the vehicle's USB port,
®
can continue to be used. However, the functions that can
®
connection and the functions which can be used by
Convenience
Apple CarPlay™
®
to "Never
®
is connected to the
3-3