Download Print this page
Fluke 5128A Quick Start Manual

Fluke 5128A Quick Start Manual

Rhapid-cal humidity
Hide thumbs Also See for 5128A:

Advertisement

Quick Links

1-year limited warranty. See the Operators Manual for the full warranty.
Contact Fluke Calibration
To see product information or download the Operators Manual and the latest manual supplements, visit Fluke
Calibration's website at www.flukecal.com.
Introduction
This document supplies safety information for the
RHapid-Cal Humidity Generator (the Product).
Safety Information
A Warning identifies hazardous conditions and actions
that could cause bodily harm or death.
A Caution identifies conditions and actions that could
damage the Product, the equipment under test, or cause
permanent loss of data.
Warning
To prevent possible electrical shock, fire or
personal injury:
• Read all safety information before you use
the Product.
• Carefully read all instructions.
• Do not use the Product around explosive
gas, vapor, or in damp or wet
environments.
• Use this Product indoors only.
4758293
PN
July 2016
© 2016 Fluke Corporation, All rights reserved.
All product names are trademarks of their respective companies.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
RHapid-Cal Humidity Generator
Safety Information
• Do not tilt the Product with water in the
reservoir. Product must be installed on a
flat stable horizontal surface.
Use only the mains power cord and
connector approved for the voltage and
plug configuration in your country and
rated for the Product.
• Replace the mains power cord if the
insulation is damaged or if the insulation
shows signs of wear.
• Make sure the ground conductor in the
mains power cord is connected to a
protective earth ground. Disruption of the
protective earth could put voltage on the
chassis that could cause death.
• Use the Product only as specified, or the
protection supplied by the Product can be
compromised.
• Do not put the Product where access to the
mains power cord is blocked.
• Do not use the Product if it is damaged.
• Disable the Product if it is damaged.
ООО «Флюк СИАЙЭС»
125167, г. Москва, Ленинградский
проспект дом 37,
корпус 9, подъезд 4, 1 этаж
5128A
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5128A and is the answer not in the manual?

Questions and answers

Summary of Contents for Fluke 5128A

  • Page 1 Safety Information 1-year limited warranty. See the Operators Manual for the full warranty. Contact Fluke Calibration To see product information or download the Operators Manual and the latest manual supplements, visit Fluke Calibration’s website at www.flukecal.com. Introduction • Do not tilt the Product with water in the reservoir.
  • Page 2 5128A Safety Information General Specifications • Do not use the Product if it operates incorrectly. AC mains voltage ....... 100 V to 240 V ±10 %, • Do not operate the Product with covers 47 Hz to 63 Hz removed or the case open. Hazardous Power consumption ......