How To Use Your Device - D-Link DWR-920V User Manual

Section 4 - How to Use Your Device

How to Use Your Device

Three-Way Calling
While on a current call, dial the second telephone number then press the Flash (recall) key.
• If the second party answers, press the Flash key again to activate the three-way calling.
• If the second party does not pick up the phone, press the Flash key twice to end the call and return to the original call.
Note: If your phone does not have a Flash key, use your phone's off-hook mechanism to perform this action.
Voicemail
Note: If the answering system on your telephone is enabled, then the second party will be directed to the answering system
instead of the voicemail service. Please disable the telephone's answering system to enable the voicemail service.
When you receive a new voicemail, the voicemail LED on your DWR-920V U.S. Cellular Home Phone will blink green.
1. Lift the handset of your telephone.
2. Dial 1 or *86 and wait for a few seconds to connect to the voicemail service
3. Follow the instructions to listen to and manage your voicemails.
Call Waiting
If someone calls you while you are on a current call, you will hear a beep tone. To answer the new call, press the Flash key on
your telephone to put your current call on hold. You can press the Flash key at any time to switch between calls.
D-Link DWR-920V User Manual 26