Samsung WD8 K64 Series Service Manual page 32

Part name
DD
MOTOR
6. To remove the hall sensor, unfasten
7. Remove the hall sensor by exerting
√ Check Points for Troubleshooting
●
→ Replace the hall sensor.
30 _Disassembly and Reassembly
WD6500K_7-8-9-11kg_1400rpm-SM.indb 30
Description
STAToR
the two (2) screws holding both the
stator and hall sensor in place.
some force to the ▲ part.
A "3E" error occurs when the tub is driven in a wash or rinse cycle but
there is no problem with the stator.
Figure
RoToR
HALL SENSoR REMovED
2018/11/9 9:53:27