Related Manuals for Samsung WD85T9 Series
Summary of Contents for Samsung WD85T9 Series
- Page 1 Washing Machine User manual WD9*T******/WD8*T****** U-PJT_COMBO-AD_SimpleUX_DC68-04198R-00_EN.indd 1 2021/1/16 10:08:49...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols Important safety precautions To minimize the risk of fire in a tumble dryer, the following should b observed Critical installation warnings Installation cautions Critical usage warnings Usage cautions Critical cleaning warnings Installation... - Page 3 Maintenance Drum Clean+ Emergency drain Cleaning Detergent drawer Defrosting your washing machine Care against an extended time of disuse Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Spare parts guarantee Specification sheet English 3 U-PJT_COMBO-AD_SimpleUX_DC68-04198R-00_EN.indd 3 2021/1/16 10:08:49...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung washing machine. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washing machine’s many benefits and features. -
Page 5: Important Safety Precautions
Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Page 6 Safety information 6. For appliances with ventilation openings in the base, that a carpet must not obstruct the openings; 7. For use in Europe: Children of less than 3 years should be kept away unless continuously supervised. 8. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 7 15. Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. 16. Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
-
Page 8: To Minimize The Risk Of Fire In A Tumble Dryer, The Following Should B Observed
Safety information 23. This appliance is intended to be used in household only and it is not intended to be used such as: – staff kitchen areas in shops, offices and other working environments; – farm houses; – by clients in hotels, motels and other residential type environments;... - Page 9 Plastic articles such as shower caps or babies’ waterproof napkin covers should not be placed in a tumble dryer. Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes an rubber-coated tennis shoes should not be placed in a tumble dryer. Do not dry unwashed items in the tumble dryer(or washing machine drying mode,etc).
-
Page 10: Critical Installation Warnings
Safety information Critical installation warnings WARNING The installation of this appliance must be performed by a qualified technician or service company. • Failure to do so may result in electric shock, fire, an explosion, problems with the appliance, or injury. The appliance is heavy, therefore take care when lifting it. -
Page 11: Installation Cautions
Following the repair by a non-authorized service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which does not carefully follow these repair and maintenance instructions. - Page 12 • Failure to do so may result in electric shock or fire. If any foreign substance enters into the appliance, unplug the power cord and contact your nearest Samsung Customer Service. • This may result in electric shock or fire.
-
Page 13: Usage Cautions
Using the appliance for business purposes qualifies as an appliance misuse. In this case, the appliance will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse. - Page 14 Safety information Do not place objects that generate electromagnetic fields near the washing machine. • This may result in injury due to a malfunction. Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water. •...
-
Page 15: Critical Cleaning Warnings
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent. • This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil. Do not use water from water cooling/heating devices. •... -
Page 16: Installation
What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or the parts, contact a local Samsung customer centre or the retailer. 01 Auto dispenser 02 Release lever... - Page 17 Spanner Bolt caps Hose guide Cold water hose Hot water hose Cap Fixer (applicable models only) Accessories (not supplied) • Stacking kit : SK-DH Staking kit is required to stack a dryer on a washing machine. NOTE • Spanner: For removing the shipping bolts and levelling the washing machine. •...
-
Page 18: Installation Requirements
Drain • Improperly connected grounding conductors Samsung recommends a standpipe 60-90 cm may cause electric shock. high. The drain hose must be connected through the hose clip to the standpipe, and the standpipe must fully cover the drain hose. - Page 19 Flooring Alcove installation For best performance, the washing machine must Minimum clearance for stable operation: be installed on a solid floor. Wood floors may need Sides 25 mm to be reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces 25 mm do not resist vibration well and may cause the Rear...
-
Page 20: Step-By-Step Installation
Installation Step-by-step installation STEP 1 Select a location Location requirements: • Solid, level surface without carpeting or flooring that may obstruct ventilation • Away from direct sunlight • Adequate room for ventilation and wiring • The ambient temperature is always higher than the freezing point (0 °C) •... - Page 21 1. Locate the shipping bolts (marked with circle in the figure) on the rear side of the washing machine. CAUTION Do not remove the screw (A) that fixes the hose clip. 2. Using the supplied spanner, loosen all the shipping bolts by turning them anticlockwise.
- Page 22 Installation 3. Insert the bolt caps (B) to the holes (marked with circle in the figure). English U-PJT_COMBO-AD_SimpleUX_DC68-04198R-00_EN.indd 22 2021/1/16 10:08:53...
- Page 23 STEP 3 Adjust the levelling feet 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner. CAUTION When installing the product make sure the levelling feet is not pressing the power cord.
- Page 24 If there is a water leak, stop operating the washing machine and disconnect it from the electrical supply. Then, contact a local Samsung service centre in case of a leak from the water hose, or contact a plumbing technician in case of a leak from the water tap. Otherwise, this may cause electric shock.
- Page 25 CAUTION Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high- pressure hose. Connecting to a non-threaded water tap 1. Remove the adaptor (A) from the water hose (B). 2.
- Page 26 Installation 6. While pulling down part (D) on the water hose, connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound. 7. To complete connecting the water hose, see 2 and 3 on the “Connecting to a threaded water tap”...
- Page 27 Aqua stop hose (applicable models only) The aqua stop hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak. NOTE The end of the aqua stop hose must be fitted to the water tap and not the machine. English 27 U-PJT_COMBO-AD_SimpleUX_DC68-04198R-00_EN.indd 27 2021/1/16 10:08:57...
- Page 28 Installation STEP 5 Position the drain hose The drain hose can be positioned in three ways: Over the edge of a wash basin The drain hose must be placed between 60 cm and 90 cm (*) above from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A).
-
Page 29: Environment
In a sink drain pipe branch The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground. (*) : 60 cm CAUTION Remove the lid on the sink drain pipe branch before connecting the drain pipe to it. -
Page 30: Before You Start
Before you start Initial setup • When you turn on the washing machine for the first time, the screen shows the initial setup process. Follow the on-screen instructions to complete it. • Initial setup will not repeat after you’ve completed it. •... -
Page 31: Laundry Guidelines
Laundry guidelines STEP 1 Sort Sort the laundry according to these criteria: • Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon. • colour: Separate whites from colours. • Size: Mixing different sized items together in the drum improves the washing performance. •... - Page 32 Before you start STEP 5 Determine the load capacity Do not overload the washing machine. Overloading may cause the washing machine to not wash properly. For the load capacity for the type of clothing, see page 41. NOTE When washing bedding or bedding covers, the wash time may be lengthened or the spin efficiency may be reduced.
- Page 33 Laundry capsules To get the best results from using laundry capsules, please follow these instructions. 1. Put the capsule in the bottom of the empty drum towards the rear. 2. Put the laundry in the drum on top of the capsule. CAUTION For cycles using cold water or cycles that complete in less than one hour, the capsule may not dissolve completely.
-
Page 34: Detergent Drawer Guidelines
Before you start Detergent drawer guidelines The automatic dispenser models provide a three-compartment dispenser: two compartments for auto- dispensing and another part for manual input. With the automatic dispensing option on, the washing machine dispenses an adequate amount of detergent or fabric softener for each load. See below for details: A. - Page 35 CAUTION • Do not operate the washing machine with the compartments not placed in the detergent drawer. A water leak may cause electric shock or injury. • Do not use the following types of detergent in the drawer. Tablet, capsule, ball, or net types. •...
- Page 36 Before you start 1. Pull the detergent drawer to open. 2. Turn the auto detergent compartment cover (A) anticlockwise to open. 3. Apply an appropriate amount of detergent to the auto detergent compartment (B). After you finish, put the cover back and turn it clockwise to close.
- Page 37 CAUTION • Do not apply detergent/softener to the drawer without the detergent/softener compartment. If you do, clean the drawer and then reinsert both compartments. • Use only liquid detergent/softener with the detergent/softener compartments. Do not use powdered detergent. • Make sure both detergent/softener compartments are inserted completely. If they are not, the washing machine may not start operating or fail to dispense washing agents.
-
Page 38: Operations
Operations Control panel Tap to turn the washing machine on or off. • If you do not manipulate the control panel for 10 minutes after the washing machine is turned on, the washing machine automatically turns off. • The washing machine automatically turns off when the cycle completes. - Page 39 Tap to change the spin speed for the selected cycle. 08 Spin • The indicator above the button indicates the default or selected setting. Tap to enter the additional functions menu. 09 Additional function Tap and hold for 3 seconds to enter the system functions menu. Tap to activate or deactivate the Smart Control function.
-
Page 40: Operating A Cycle
Operations Operating a cycle 1. Tap turn on the washing machine. 2. Turn the Navigation dial to select the cycle you want. For more information on Cycle overview, see page 41. 3. Tap , or to change the default cycle settings. 4. -
Page 41: Cycle Overview
Cycle overview Cycle Description Max load (kg) • For cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the rinse count are Cotton automatically adjusted according to the load. • For cleaning lightly soiled cotton items at a nominal temperature of 20 °C. - Page 42 Operations Cycle Description Max load (kg) • For bed spreads, bed sheets, bedding covers, etc. Bedding • For best results, wash only 1 type of bedding and make sure the load weighs less than 2.0 kg. Shirts • For shirts, blouses that are made of cotton, synthetic fiber. •...
- Page 43 Cycle Description Max load (kg) • Cleans the drum by removing dirt and bacteria from it. • Cleans the rubber door gasket by removing dirt from the Drum Clean+ gasket. (WD**T9*****, • Perform once every 40 washes with no detergent or bleach WD**T7*****, applied.
-
Page 44: Additional Functions
Operations Additional Functions Using Additional Functions 1. Tap 2. Turn the Navigation dial to select the desired additional function. 3. Tap to change the selected function’s settings or start the function. NOTE • To return to the main screen, tap again or turn the Navigation dial to select Back and tap •... - Page 45 Bubble Soak This function helps remove a wide variety of stubborn stains. With Bubble Soak selected, laundry is thoroughly soaked in water bubbles for effective washing. 1. Select a cycle and change the cycle settings as necessary. 2. Tap 3. Turn the Navigation dial to select Bubble Soak, and then tap Bubble Soak is available with and adds up to 30 minutes to these cycles: Cotton, Synthetics, Bedding, and Super Speed.
- Page 46 Operations Delay End You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1.
-
Page 47: System Functions
System Functions Using System Functions 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial and select the desired system function, and then tap 3. Tap to change the selected function’s settings or start the function. NOTE To return to the main screen, tap again or turn the Navigation dial to select Back and tap Water Hardness Set the water hardness according to your region. - Page 48 Operations Alarm You can turn on or off the sound from the washing machine. When this function is set to Off, the AddWash alarm, the melody of cycle completion, and the power-off beep does not sound. However, the other sounds stay active.
-
Page 49: Special Features
Special features AddWash (applicable models only) To add laundry after the wash starts, use the AddWash door. 1. Tap and hold to stop the wash cycle. 2. Press the upper area of the AddWash door to unlock the door. The door will move inward slightly when you press it and then open. - Page 50 Operations • When the AddWash door closes, the door seals up and no water can leak. However, you may encounter what appears to be water leak around the door - some residual water remaining around the AddWash door may form water drops. This is normal. •...
- Page 51 Stay Connect Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a cycle. Your washing machine stays connected to the app so you can send additional instructions, whether you are at home or away. 1.
-
Page 52: Smartthings
You don’t need a separate app to create your account. NOTE If you have a Samsung account, use the account to log in. A registered Samsung smartphone or tablet user automatically logs in. To register your appliance to SmartThings 1. -
Page 53: Open Source Announcement
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name. -
Page 54: Maintenance
Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. Drum Clean+ Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber door gasket. 1. -
Page 55: Emergency Drain
Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover to open. -
Page 56: Cleaning
Maintenance Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. AddWash door 1. Open the AddWash door. 2. Use a wet cloth to clean the AddWash door. Do not use cleaning agents. - Page 57 Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord. 2. Close the water tap. 3. Loosen and disconnect the water hose from the back of the washing machine.
- Page 58 Maintenance Debris filter It is advisable to clean the debris filter every 2 months to prevent its clogging. A clogged debris filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum. See the Emergency drain section.
-
Page 59: Detergent Drawer
Detergent drawer 1. While holding down the release lever on the inner of the drawer, pull the detergent drawer to remove. 2. Open the cover and clean inside the auto detergent/softener compartments with water. Wipe the water and close the covers when you finish cleaning them. - Page 60 Maintenance 4. Insert the detergent drawer back into the washing machine. NOTE Make sure the drawer recess is completely dry before inserting the detergent drawer. CAUTION Do not spray water into the detergent drawer recess. It may cause electric shock or fire. English U-PJT_COMBO-AD_SimpleUX_DC68-04198R-00_EN.indd 60 2021/1/16 10:09:14...
-
Page 61: Defrosting Your Washing Machine
Defrosting your washing machine The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4. -
Page 62: Troubleshooting
Troubleshooting If there is any problem, check the information message on the LCD screen and follow the on-screen instructions. If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the table below and try these suggestions. - Page 63 Problem Action • Make sure the washing machine is installed on a level, solid floor that is not slippery. If the floor is not level, use the levelling feet to adjust the height of the washing machine. • Make sure the shipping bolts are removed. •...
- Page 64 Troubleshooting Problem Action • Make sure you use the recommended types of detergent as appropriate. • Use high efficiency (HE) detergent to prevent oversudsing. Excessive suds. • Reduce the detergent amount for soft water, small loads, or lightly soiled loads. •...
- Page 65 Problem Action • Make sure the door is properly closed. • Make sure all hose connections are tight. • Make sure the end of the drain hose is correctly inserted and secured to the drain system. Leaks water. • Avoid overloading. •...
-
Page 66: Information Codes
Troubleshooting Information codes If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action Water is not draining. • Make sure the drain hose is not frozen or clogged. •... - Page 67 Water has overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre. Check the drain hose. • Make sure the end of the drain hose is not placed on the floor.
- Page 68 The drying heater is not working properly. • Turn the machine off, and restart the cycle. • If the information code remains, contact a local Samsung service centre. If any information code keeps appearing on the screen, contact a local Samsung service centre. English U-PJT_COMBO-AD_SimpleUX_DC68-04198R-00_EN.indd 68...
-
Page 69: Specifications
Specifications Fabric care chart The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximise garment life and reduce laundry problems. -
Page 70: Protecting The Environment
Specifications Protecting the environment • This appliance is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the lid so that animals and small children cannot get trapped inside the appliance. -
Page 71: Specification Sheet
Specification sheet “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Type Front loading washing machine Model name WD85T9***** A (Width) 600 mm B (Height) 850 mm C (Depth) 600 mm Dimensions 690 mm (WD**T*8****, WD**T*5****) 680 mm (WD**T*3****, WD**T*0****) 1120 mm Water pressure 50-800 kPa... - Page 72 QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 (Other) www.samsung.com/au/support NEW ZEALAND 0800 726 786 (All Product) www.samsung.com/nz/support DC68-04198R-00 U-PJT_COMBO-AD_SimpleUX_DC68-04198R-00_EN.indd 72 2021/1/16 10:09:22...