Samsung WD8 K64 Series Service Manual page 24

Part name
BUBBLE PUMP AND
DRAIN PUMP
HOSE-TUB
22 _Disassembly and Reassembly
WD6500K_7-8-9-11kg_1400rpm-SM.indb 22
Description
6. Release all band ring to removal hose
except for hose drain.
7. Push the pump inwards slightly and
remove it.
8. Release the clamper hose which con-
nected pump and hose drain, then
separate it.
Check Points for Troubleshooting
★
1. Separate the Drain Filter and check if any alien substances are in-
side the pump (e.g. coins, buttons .., etc.) → Remove these if found.
2. Check if the wire driving the pump has come loose → Take the rel-
evant countermeasure if necessary.
3. When water leaks, check the assembly status of the Clamp Hose,
and Cap Drain → Take the relevant countermeasure if necessary.
Turn the filter counterclockwise to remove the remaining water.
1. Separate the BAND RING,
and then remove the HOSE
hose-tub.
Figure
2018/11/9 9:53:09