Samsung WD8 K64 Series Service Manual page 16

Part name
ASSY PANEL
CONTROL
14 _Disassembly and Reassembly
WD6500K_7-8-9-11kg_1400rpm-SM.indb 14
Description
1. Remove the 2 screws holding
the front operating panel.
2. Remove the two screw at the
top of the assy panel control.
3. Hold the ASSY-PANEL
CONTROL while pulling it
outwards and release the hook
to remove it.
4. Disconnect the terminals
connected to the PCB by hand.
5. Press the Clasp ① and
Clasp ② at the same time, Lift
pcb up, then take it out from
left.
Figure
3 5
1
2 4 6
2018/11/9 9:52:54