Setup Utility
Reset Resources Assignment
Set this parameter to
to avoid IRQ conflict when
Yes
installing non-PnP or PnP ISA cards.
This clears all
resource
assignments
and
allows
BIOS
to
reassign
resources to all installed PnP devices the next time the
computer boots.
After clearing the resource data, the
parameter resets to
.
No
Onboard LAN Chip
If you are connecting the computer to a network using the
onboard network chip, this parameter should be set to
. If you want to use a network add-on card instead,
Enabled
set this parameter to
.
Disabled
Onboard Audio Chip
To enable audio using the onboard audio chip, this
parameter should be set to
. If you want to use an
Enabled
.
audio add-on card instead, set this parameter to
Disabled
User's Guide
61