Monitored Activities; Quickstart State Timer; Point Device Location - Acer AcerBasic II User Manual

Setup Utility
SYSTEM SUSPEND TIMER
This parameter sets the computer to the lowest power
saving mode. It automatically enters into the suspend mode
after a specified period of inactivity.
In suspend mode, the CPU clock stops. Any keyboard or
mouse action, or any enabled monitored activities occurring
through the IRQ channels resume computer operation.

Monitored Activities

The IRQ items under this parameter allow you to monitor
system activities occurring through the IRQ channels to
determine whether or not to enter power saving mode.
For example, if you assign IRQ 3 to a fax/modem and you
set this item to , any fax/modem activity wakes up the
Enabled
computer from standby mode.

QuickStart State Timer

The QuickStart State Timer specifies how long the
computer enters or wakes up from its power saving mode.
The default setting is seconds. Other options include
2 10
, and .
sec 15 sec OFF

Point Device Location

This parameter sets the location of your pointing device
(e.g., mouse) for power management purposes. The default
value is . Other options include , and .
PS/2 COM1 COM2 None
50 User's Guide