Date And Time - Acer AcerBasic II User Manual

Setup Utility
Press the page down key (PgDn) to move to the next page
or the page up key (PgUp) to return to the previous page.
Press the escape key (Esc) to exit the configuration menu.
The following screen shows page 2 of the Basic System
Configuration menu.
Enhanced IDE Features
Hard Disk Block Mode ............................... [Enabled ]
Advanced PIO Mode ................................. [Enabled ]
Hard Disk Size > 504MB ........................... [Enabled ]
Hard Disk 32-Bit Access ............................ [Enabled ]
Large Memory Support Mode............................ [ Normal ]
Num Lock After Boot ........................................ [Enabled ]
Memory Test .................................................... [Disabled]
Quiet Boot ........................................................ [Enabled ]
Configuration Table .......................................... [Enabled ]
= Move Highlight Bar,
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit

Date and Time

The real-time clock keeps the system date and time. After
setting the date and time, you need not enter them every
time you turn on the computer. As long as the internal
battery remains good (approximately seven years) and
connected, the clock continues to keep the date and time
accurately even when the power is off.
38
Basic System Configuration
= Change Setting
Page 2/2
User's Guide