Test Record; Test Failure; Instrument Specification - Agilent Technologies 81610A User Manual

Performance Tests

Test Record

Test Record
Results of the performance test may be tabulated on the Test Record
provided after the test procedures. It is recommended that you fill out
the Test Record and refer to it while doing the test. Since the test
limits and setup information are printed on the Test Record for easy
reference, you can also use the record as an abbreviated test
procedure (if you are already familiar with the test procedures). You
can also use the test record as a permanent record and it may be
reproduced without written permission from Agilent Technologies.

Test Failure

If the Agilent 81610A/11A/12A/13A/14A Return Loss module fails any
performance test, return the instrument to the nearest Agilent
Technologies Sales/Service Office for repair. The 81610CC Reference
Cable may be recalibrated using the procedure given in "Calibrating
the 81610CC Reference Cable" on page 73; a repair is not possible.

Instrument Specification

Specifications are the performance characteristics of the instrument
that are certified. These specifications, listed in "Specifications" on
page 49, are the performance standards or limits against which the
Agilent 81610A/11A/12A/13A/14A Return Loss module can be tested.
"Specifications" on page 49 also lists some supplemental
characteristics of the Agilent 81610A/11A/12A/13A/14A Return Loss
module. Supplemental characteristics should be considered as
additional information.
62
Agilent 81610A/11A/12A/13A/14A Return Loss Module, Fifth Edition