Powering The Utred30-16 - LogTag Recorders UTRED30-16 Product User Manual

30-day temperature recorder with display
Table of Contents

Advertisement

Powering the UTRED30-16

Powering the UTRED30-16
The UTRED30-16 can be powered from one of two sources:
 
Via two AAA batteries
l
The batteries have a life span of approx. 6 to 12 months, depending on the quality of
the battery, log interval, frequency of reviewing data on the display and how often an
alarm sounds.
The batteries inside the unit will not be charged when external power is
supplied.
A 4-bar battery indicator shows an approximate remaining battery capacity. If the
batteries are full, this symbol will be shown:
When the batteries are empty, this symbol will be shown, and the batteries require
replacement.
Please always replace both batteries with fresh ones at the same time.
Replacing only one of the batteries with a partially charged battery will drain
the internal backup battery.
It is possible to use rechargeable AAA cells, however, please note that due to
the different voltage the battery indicator will not show the correct
remaining percentage, and the internal backup battery may drain faster.
Rechargeable cells will deplete faster than Alkaline or Lithium batteries.
UTRED30-16 User Guide
24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UTRED30-16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents