LogTag Recorders UTRED30-16 Product User Manual page 61

Appendix 2 - Glossary
C
Consecutive Alarm
Temperature or Humidity readings are above or below the configured threshold for the
time defined without interruption.
Cumulative Alarm
Temperature or humidity readings are above or below the configured threshold for the
total of time defined, but readings may not necessarily be sequential.
D
Delay Value
Number of logs that have to be in an -> alarm range to trigger an alarm event
Direction
Whether an alarm is a lower or upper alarm
I
Inspection
Pressing the Mark button on a logging device
Inspection Event
Pressing the Mark button on a logging device
Instant Alarm
One single temperature or humidity reading is above or below the configured threshold
L
Latched Alert
Alert that remains active even if the alarm trigger conditions are no longer met.
Lower Alarm
An alarm is called a lower alarm if the alarm trigger condition requires readings to go
below a low threshold temperature
Lower Alarm Threshold
If a recorded temperature or humidiy value is equal to or below this value it is regarded to
be an alarm reading
N
Non-Alarm Range
Target temperature/humidity range where the readings are regarded as acceptable
UTRED30-16 User Guide 61