Abit AW8 User Manual page 34

3-6
#
Voltage Monitoring:
Click <Enter> key to enter its submenu:
All Voltages:
These items display the voltage of each element.
! Shutdown Enable:
Use <Space> key to enable system shutdown function. If the voltage of corresponding element is
higher/lower than the high/low limit, the system would automatically shutdown.
! Beep Enable:
Use <Space> key to enable warning beeps function. If the voltage of corresponding element is
higher/lower than the high/low limit, warning beeps will sound.
! High/Low Limit:
These items set the high and low voltage limit.
NOTE: The value of high limit must be set above the one of low limit.
AW8 Series
Chapter 3