Assembling And Dismantling The Two-Piece Shaft; Fitting The Loop Handle - Husqvarna 535FBX Original Instructions Manual

Assembling and dismantling the
two-piece shaft
Assembly
• Loosen the coupling by turning the knob counter-
clockwise.
• Align the tab of the attachment (A) with the arrow on
the coupling (B).
B
• Push the attachment into the coupling until the
attachment snaps into place.
• Before using the unit, tighten the knob securely.
64 – English
ASSEMBLY
A
Dismantling
• Loosen the coupling by turning the knob (at least 3
times).
• Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
C

Fitting the loop handle

• Clip the loop handle onto the shaft. Note that the loop
handle must not be fitted in front of the arrow marked
on the shaft.
• Slide the spacer into the slot in the loop handle.
• Fit the nut, knob and screw. Do not overtighten.
• Now make a final adjustment to give yourself a
comfortable working position. Tighten the knob.