Connecting Lift Tube Cables - ShoreStation Manual SSV20100MS Assembly Manual

Step #15 – Connecting Lift Tube Cables
The cables on the Mechanical winch lifts should be down so they can be attached to the lift
platform.
 Attaching cables to Aluminum Cradle Tubes: the cable coming from the outside pulley of
the Lift Tube goes thru the outside holes in the Cradle Tube. The cable coming from the
inside pulley, on the other end of the Lift Tube, goes thru the inside hole on the Cradle
Tube.
Secure the cables to the Cradle Tubes with 2 brass nuts and a flat washer as shown below.
Refer to the chart on page 12 for the proper sizes.
Midwest Industries, Inc.
Page 17 of 19
Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004423
Rev 2