Troubleshooting; Tools And Parts Provided - AHA Chamfer-Pro User Manual

3. The drawings of maximum beveling values when applying each assembly of No.2
Trobleshooting
Troubles
Chamfered surface not
smooth
Longer sparks at the
carbon brush of the
motor
Difficult to rotate the
beveling depth adjusting
handle

Tools and Parts Provided

1. 3mm hexagonal T-Handle Wrench
2. 4mm Ball L-Wrench – long axis
3. 13mm Spanner Composition Wrench
4. Air Valve
Chamfer-Pro User's Manual
Causes
- Worn or dull insert tips
- Too fast beveling speed
- Deterioration of the motor
- Accumulated chips or dust in the
adjusting screw(List No. 19) or the
internal thread
- 9 -
Solutions
- Replace insert tips
- Slow down the beveling
speed
- Replace or repair the motor
- Remove the chips or dust in
those parts by air blowing
and etc. (Regularly)
1EA
1EA
1EA
1EA
AHA Industrial Co / www.ahaind.com