Table of Contents
Advertisement
Characteristics of beveling angle and beveling depth of CP2100
1. As per the beveling angle, the characteristics of beveling depth are illustrated below.
(Based on the CP2100 in standard assembly)
< Assembly in stardard>
2. Utilization of maximum beveling value according to Cutter position change (Optional)
The item 1 above is within the scope of basic assembly, but the maximum beveling
width of CP2100 is 21mm, so for maximum use of this area, the maximum beveling
width can be applied to any angle (0 to 60 ̊) by adjusting the height of the Cutter
(List No.6) using the height adjustment Shim (List No.7) as follows.
( ※ The above drawing is an example, and may have a tolerance depending on the thickness or location of the shim.)
Chamfer-Pro User's Manual
A : Maximum beveling depth at the adjusted angle
B.
: Maximum beveling width at the adjusted angle
- 8 -
AHA Industrial Co / www.ahaind.com
Advertisement
Table of Contents
