Table of Contents
Advertisement
WARNING
• Turn off the electrical supply and
gas supply going to the range.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
4. CONVERTING THE SURFACE BURNERS
take conversion kit out of the accessory
assembly.(see illustration the below)
LP orifice spuds have a orifice code on the top or
the side, denoting the location on the range
where it is to be installed.
Conversion kit
Top burner orifices
CONVERSION TO LP GAS
Denotes
orifice
code
Broil and Bake
burner orifices
1) Remove grates, burner caps and burner
heads.
2) Remove the brass orifice spud in the chimney
of each burner using a 13/32" or 10 mm nut
driver.
3) Install the LP orifice spuds into their correct
positions as described previously.
BURNER OUTPUT RATINGS; BTU/HR
LP (Propane) Gas, 10" W.C.P
MODEL
BTU RATE
BURNER
LF
LR
RR
RF
CTR
BROIL
BAKE
Q
• Orifice Locations for LP Gas
C
LR
M
LF
M
Q
[ LRG4111]
V
5-2
V
LRG4111
ORIFICE CODE
10,000
Q
9,100
M
5,000
W
10,000
Q
9,100
M
12,500
F
17,000
Y
F
Broil and Bake
I
[LRG4111]
Broil and Bake
RR
RF
CTR
W
Q
AA
H
Advertisement
Table of Contents
Troubleshooting
