LG LRG4111ST Service Manual page 15

REMOVING THE BACK, CONTROL COVER AND GLASS TOUCH
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply and gas supply
going to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Remove the 8 screws from the rear control cover
and remove the cover.
4. Remove the 11 screws from the rear back cover
and remove the cover.
COMPONENT ACCESS
ASSEMBLY
Control Cover
Back Cover
5. Separate PCB assembly after unpluging the
connectors.
6. Remove the 2 screws of the eyebrow from the
controller sub assembly and remove the eyebrow.
7. Remove the 6 screws of the controller sub
assembly.
8. Pull the controller sub assembly out.
9. Replace the Glass touch assembly.
3-2
6 Connectors of PCB
Eyebrow