Components
Igniter Type-2
Oven (safety) valve
Ignition switch
Test procedures
1. Remove wire leads
2. Measure resistance.
1. Refer to page 3-28 for servicing procedure.
2. Measure the resistance after cooling down.
(Multiple meter scale : R x 1)
Upside
Downside
1. Refer to pages 3-6, 3-7 for servicing procedure.
2. Measure the resistance by rotating the cam of each
switch slowly.
(Multiple meter scale : R x 1)
4-3
Results
Normal: 50 Ω ~ 800 Ω
(Room Temperature
Resistance)
Replace if:
Infinite(opened)
Normal: Approximately
1 ~ 3 Ω
If not replace
approximately
other
40° ~ 80°
Continuity
Infinite