LG LRG4111ST Service Manual page 27

REMOVING & REPLACING THE LIFT-OFF OVEN DOOR
CAUTION
• Be careful when removing and
lifting the door.
• DO NOT lift the door by the handle.
- Doing so can result in personal injury as the
door is very heavy.
To remove the door:
1. Fully open the door.
2. Pull the hinge locks up
toward (Fig.1) the door
Hinge
frame, to the unlocked
position.
3. Firmly grasp both sides of the door at the top.
4. Close door to the door
removal position, which is
approximately 5 degrees.
(refer to the Fig.2)
Slot
Hinge
5. Lift door up and out until the hinge arm is clear of
lock
the slot.
Hinge arm
COMPONENT ACCESS
Lock
Lock
Unlock
Slot
Unlock
Slot
Hinge
lock
lock
<Fig.1>
Lock
Unlock
<Fig.2>
Hinge arm
Bottom
Bottom
edge of
edge of
slot
slot
Indentation
Indentation
To replace the door:
1. Firmly grasp
both sides of
the door at the
top.
2. With the door at
the same angle
as the removal
position, seat
the indentation
of the hinge
arm into the
bottom edge of
the hinge slot. The notch in the hinge arm must be
fully seated into the bottom of the slot.
3. Fully open the door. If the door will not fully open,
the indentation is not seated correctly in the bottom
edge of the slot.
4. Push the hinge locks down
against the front frame of
the oven cavity to the
locked position.
5. Close the oven door.
3-14
Hinge arm
Hinge arm
Hinge arm
Hinge lock
Hinge lock
Bottom
edge of
slot
Indentation
Hinge arm
Hinge lock