Subscribe to Our Youtube Channel
Related Manuals for Taurus FX9.9
Summary of Contents for Taurus FX9.9
- Page 1 Assembly and Operating Instructions max. 180 kg ~ 90 Min. 127 kg L 211 | W 82 | H 188 TFFX99TFT.01.02 Elliptical Trainer FX9.9 TF-FX99-TFT...
- Page 2 FX9.9 Touch...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Electrical Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly OPERATING INSTRUCTIONS Console Display Button Functions Programmes 3.3.1 Quick Start 3.3.2 Target programmes 3.3.3 Pre-set programmes 3.3.4 User-defined programmes 3.3.5 Heart rate-oriented programmes Fitness Test Media Bluetooth and Fitness Apps... - Page 4 ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing WARRANTY CONTACT FX9.9 Touch...
- Page 5 With Taurus® fitness equipment, the focus is on what sport is all about: maximum performance! Therefore, the equipment is developed in close consultation with athletes and sports scientists.
- Page 6 This notice indicates potentially hazardous situations which, if not avoided, will result in death or serious injuries! NOTICE This notice indicates further useful information. Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts. FX9.9 Touch...
-
Page 7: General Information
GENERAL INFORMATION Technical Data TFT Display: Training time in min. Speed in km/h Traning distance in km Calories in kcal Resistance level Incline in % Heart rate (using the hand pulse sensors or a chest strap) RPM (Rotations per minute) Watts Brake system: Electro-magnetic induction brake... -
Page 8: Personal Safety
Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons. ࣑ ATTENTION Do not insert any objects of any kind into the openings of the device. FX9.9 Touch... -
Page 9: Electrical Safety
Electrical Safety DANGER ⚠ In order to reduce the risk of an electric shock, always unplug the equipment from the mains socket immediately after your workout, before assembly or dismantling, and before maintenance or cleaning. Do not pull on the cable. ⚠... -
Page 10: Assembly
To prevent damage to the equipment and the floor, assemble the equipment on a mat or packaging board. NOTICE In order to make the assembly as simple as possible, some screws and nuts to be used can already be pre-assembled. Ideally, assemble the equipment at its later set-up place. FX9.9 Touch... -
Page 11: Scope Of Delivery
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠... -
Page 12: Assembly
Screw the rear foot with the rails (155) to the M8*1.25*55L main frame (1) with eight washers (51), eight M8*1.25*35L spring washers (4), four hexagonal screws (147), M8*1.25*35L four hexagonal screws (148) and hand tighten D15.4*D8.2*2T the screws in place. D15.4*D8.2*2T D25*D8.5*2T D25*D8.5*2T step1 step1 FX9.9 Touch... - Page 13 Step 2: Assembling the console mast Connect the console cable in the mast (101) with the console cable in the main frame (102). Connect the signal cable in the mast (178) with the signal cable in the main frame (179). ࣑...
- Page 14 Screw the left arm (12L) onto the console mast (11) with two Allen screws (6). Screw the right arm (12R) onto the console mast (11) with two Allen screws (6). Only hand tighten the screws in place. M8*1.25*20L step3 FX9.9 Touch...
- Page 15 Step 4: Mounting the pedals Mount the right and left pedal poles (14R/14L) on their respective sides of the main frame (1), each with two washers (73), one Allen screw (72) and one locking nut (74) (see fig. 4-1). Mount the right and left pedal mounts (15R/15L) on their repsective arm (12R/12L), each with two washers (73), one Allen screw (72) and one locking nut (74) (see fig.
- Page 16 Screw the right and left handles (13R/13L) onto the respecitve arm (12R/12L), each with three curved washers (9), three Allen screws (8) and three locking nuts (10) (see figs. 5-1 & 5-2). Only hand tighten the screws in place. M8*1.25*50L D22*D8.5*1.5T M8*1.25*8T step5 FX9.9 Touch...
- Page 17 Step 6: Mounting the console Connect the console cable from the console (100) with the console cable from the console mast (101) (see fig. 6-1). Connect the first hot-key cable from the console (106) with the first hot-key cable from the console mast (108) and the second hot-key cable from the console (107) with the second hot- key cable from the console mast (109) (see fig.
- Page 18 Screw the wheel covers (63) on both sides of the crosstrainer, each with two screws (97) (see fig. 7-6) and hand tighten the screws in place. Screw the axial covers (71) on both sides of the crosstrainer, each with two screws (97) (see fig. 7-7) and hand tighten the screws in place. FX9.9 Touch...
- Page 19 ST4.2*15L M5*0.8*12L step7...
- Page 20 Do not use or switch off the equipment during the update. Check whether another update is available and carry it out as described above at regular intervals. If a new version is available, the display shows a white icon. Otherwise the icon will be grey. FX9.9 Touch...
-
Page 21: Operating Instructions
OPERATING INSTRUCTIONS NOTICE Familiarise yourself with all the functions and setting options of the device before starting training. Have the proper use of this product explained to you by a specialist. Console Display DISPLAY DESCRIPTION Display of the current resistance level Level Display range: 1–32 Display of the training time in minutes... -
Page 22: Button Functions
Change between RPM and SPEED FITNESS TEST Press in main menu to get straight to the fitness test PROGRAM Press in main menu to get to the pre-set programmes Start or pause the programme START/STOP Continue after pausing the programme FX9.9 Touch... -
Page 23: Programmes
Programmes This equipment offers many different programmes. This includes: a quick start programme, target programmes, pre-set programmes, user-defined programmes, heart rate-oriented programmes and one fitness test. 3.3.1 Quick Start When you are in the main menu, simply press START to start a training session via quick start. Alternatively you can also tap on „QUICK START“... - Page 24 Setting time / 30 = time for each section Programme LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE FX9.9 Touch...
- Page 25 Setting time / 30 = time for each section Programme LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL...
- Page 26 Setting time / 30 = time for each section Programme LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE FX9.9 Touch...
- Page 27 Setting time / 30 = time for each section Programme LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE LEVEL INCLINE...
-
Page 28: User-Defined Programmes
Press the STOP button to pause your training. The resistance level is set to 0. 6.1. Press STOP on the display to end your training and an overview of the collected training data will be displayed. 6.2. Press START to continue with your training. FX9.9 Touch... -
Page 29: Heart Rate-Oriented Programmes
3.3.5 Heart rate-oriented programmes ⚠ WARNING Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid. There are three different heart rate-oriented programmes. -
Page 30: Fitness Test
In case the console does not receive a signal for 15 seconds the programme will be stopped. If your heart rate gets to high the console will display „OVER PULSE“. In this case, please interrupt your test immediately. Upon completion of the test an overview of the collected training data will be displayed. FX9.9 Touch... -
Page 31: Media
Media Here you will find many different apps like YouTube, Twitter, Facebook or Instagram. IMPORTANT NOTE To make sure the preinstalled apps are working correctly, you will have to update them from time to time. The apps that need to be updated will give you a message. To update the app, you need to have a google account. -
Page 32: Bluetooth And Fitness Apps
You will find the fitness apps in the app stores of Google or Apple. There you will find the apps “Kinomap” or “Zwift”. Please note that these apps are produced by an external manufacturer. Sport-Tiedje does not take any responsibility regarding the availability, functionality or contents of these programmes. Example: Kinomap FX9.9 Touch... -
Page 33: Storage And Transport
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑... -
Page 34: Troubleshooting, Care And Maintenance
(e.g. Mobile, Speakers, etc.) Chest strap Use a compatible chest strap (see compatible recommended accessories) No pulse displayed Position of the chest Re-position the chest strap and/or strap is incorrect moisten the electrode(s) Batteries are empty Change the batteries FX9.9 Touch... -
Page 35: Maintenance And Inspection Calendar
Maintenance and inspection calendar To avoid damages from sweat, the crosstrainer must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Quarterly Half-yearly Yearly Display of the console Lubrication of moving... -
Page 36: Recommended Accessories
Of course, you can also contact our customer service: by telephone, e-mail, in one of our branches or via our social media channels. We will be happy to advise you! chest strap floor mat chest strap contact gel silicone spray towels FX9.9 Touch... - Page 37 Maximum weight/max. Benutzergewicht: Class/Klasse: Date/Datum: Sport-Tiedje GmbH, Flensburger Str. 55, 24837 Schleswig MADE IN Serial nº.: Enter the serial number in the appropriate field. Serial number: Brand / Category: Taurus / Cross-Elliptical Trainer Model Name: FX9.9 Touch Article Number: TF-FX99-TFT...
- Page 38 747A2-6-5171-00 adjustable wheel D38*M10*1.5 26000-6-1095-B0 allen nut M10*1.5*8T 55210-2-2008-NA fixing plate for idle wheel 747S0-3-1600-00 electric magnetic system D265*153*50 747S0-3-3102-01 crank axle welding set 747S0-3-2903-01 pulley Wheel D350*29.9*3T 58008-6-1036-D0 multi-groove Belt 520 PJ8 58004-6-1110-00 C key 8*7*20L 75000-6-3107-01 FX9.9 Touch...
- Page 39 left chain 734.4*878.2*98.1 747S0-6-4501-B0 right chain 734*878.2*105.2 747S0-6-4502-B0 left front chain cover 459.7*225.5*87.2 747S0-6-4529-B1 right front chain cover 459.7*225.5*93.8 747S0-6-4530-B1 front decorative cover 168.9*175.2*170.8 747S0-6-4523-B20 upper decorative cover 639*313.7*176.5 747S0-6-4520-B0 rear decorative cover 217.5*177.1*144.6 747A2-6-4521-B0 round chain D632.9*36.7 747S0-6-4506-B0 side cap 148*130.3*16.1 747S0-6-4582-C0 cover for rear stabilizer...
- Page 40 D28*D8.5*3T 55108-1-2830-NA hex nut M8*1.25*6T 55208-2-2006-NA hex bolt M8*1.25*30L 50108-5-0030-C4 plastic washer D50*D10*1.0T 55110-1-5010-BF anti-loose nut M6x1.0x6T 55206-1-2006-CA hex bolt M6*75L 50106-2-0075-N0 fixing plate 20*27*4T 815G0-6-1673-N0 hex bolt M6x1.0x15L 50106-5-0015-C0 hex nut M6*1*5T 55206-2-2005-NA hex bolt M8x1.25x20L 50108-5-0020-C0 FX9.9 Touch...
- Page 41 anti-loose nut M8*1.25*8T 55208-1-2008-CA cross screw ST4.2*15L 52842-2-0015-F0 cross screw M5*0.8*12L 52605-5-0012-F0 computer bracket(front) 196.4*109.5*49.1 747S0-6-2592-B0 computer bracket(rear) 196.3*109.5*96.4 747S0-6-2593-B0 upper computer cable 300L 734S5-6-2572-00 middle computer cable 1000L 734S5-6-2587-00 lower computer cable 800L 747S3-6-2573-00 system connect cable 350L 820S0-6-3177-00 sensor cable 450L 815G0-6-2576-00...
- Page 42 747S3-6-3482-00 VR control cable 1200L 747S3-6-3475-00 handpulse upper cable 734S5-6-2585-00 neutral wire 300L 747S3-6-3479-00 live wire 300L 747S3-6-3480-00 computer Fixing Plate 747A2-3-2725-J2 allen spanner 58030-6-1031-D1 open sanner 188*6.5T 58030-6-1039-C1 spanner 58030-6-1005-N2 121*D6 allen spanner 58030-6-1033-N0 FX9.9 Touch...
- Page 43 Exploded Drawing...
- Page 44 WARRANTY Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline.
- Page 45 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
- Page 46 Mo - Fr 08:00 - 18:00 09:00 - 18:00 09:00 - 18:00 Please find a detailed overview including address and opening hours for all stores of the Sport-Tiedje Group in Germany and abroad on the following website: www.sport-tiedje.com/en/stores FX9.9 Touch...
- Page 47 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Sport-Tiedje is Europe’s largest specialist store for www.sport-tiedje.co.uk home fitness equipment with currently 80 stores www.sport-tiedje.de/blog and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 web shops www.facebook.com/SportTiedje in the respective national language or have their desired equpiment assembled on site.
- Page 48 Elliptical Trainer FX9.9...
Need help?
Do you have a question about the FX9.9 and is the answer not in the manual?
Questions and answers