Upgrade Succeeded - ATEN CS-1742 User Manual

Upgrade Succeeded

After the upgrade has completed, a screen appears to inform you that the procedure
was successful.
To complete the upgrade:
1. Click Finish to close the Firmware Upgrade Utility.
2. Power off the switch
M
Unplug the KVM cables from the back of the switch.
M
If you are using a power adapter with your switch, unplug its power
adapter cable from the power jack.
3. Remove the Firmware Upgrade Cable.
4. Connect all the KVM cables.
5. If you are using a power adapter, plug its cable back in.
The Firmware Upgrade Utility
2004-09-24
27