Pegasus Astro FocusCube v2 Operating Manual page 11

Motor Settings - New Position
If you need to change the current position of the controller, you can do it through this option.
Locate the "Set New Position" field, type the new desired position and click Set button on the right.
Controller will set as new position the value you typed.
Please note: controller will not move the motor. Controller will only change the value of the reported current
position. This feature is very useful when you need to zero the position of the focuser or set another value.
You can also zero the position of the focuser by clicking the
Position Presets and Motor Rates
You can easily set and save custom names and step values. Right click each position preset or rate and a popup window will
appear. Type the desired step count and click OK button.
button at the top taskbar of the application.
PEGASUS ASTRO – FOCUSCUBE V2
11
| 1.2