Advertisement
Hardware Setup
RecTrac 10.3
Connecting to Army Networks
1
When first setting up the MX925 on the network you will see this screen. The MX925 gets
this error because it is set up to use DHCP to get network information. Army networks are
not set up to provide DCHP so we have to manually enter the network information.
2
Enter 159 simultaneously on the keyboard to get to the system administration screen.
3
Enter password of 166832
6
Note: You can skip to
Device Preamble Process
and assigning Ethernet information to the device "offline." The steps below can be
used if an Ethernet already plugged in.
by not plugging in the Ethernet cable
© 2018 by Vermont Systems, Inc.
Advertisement
