Advertisement
Change Default Counter Tip Amount (RecTrac)
The MX925s are shipped with the following default tip amounts: 5%, 10%, 15%, 20%, Other,
None. The garrison can change these default amounts. As an Example, the default amounts can
be changed to 10%, 15%, 18%, 20%, Other, None. To make this change follow these steps.
1
Press 159 on the keypad to enter the device configuration mode.
2
Enter password 166832
3
Navigate to Admin • Config and select config.usr1. It will take a minute or so to populate
the screen.
4
Scroll about a third of the way through the settings until you see the section [ctt]. This
section contains the presettip_1, presettip_2, presettip_3 and presettip_4 entries.
5
Use the stylus or you finger to select the entry you want to change. Use the onscreen
keyboard or the device keyboard to backspace to clear the current value and enter the new
value. Use the Enter key on the keypad (green circle) to save the new entry.
6
Return to the Home screen and reboot the device.
© 2018 by Vermont Systems, Inc.
RecTrac/CYMS Setup
RecTrac 10.3
23
Advertisement
