Advertisement
Select "Static" network configuration
This will prompt for the following static IP settings:
After entering in each IP, hit the enter key on the unit's keypad, which has the green circle
on it (bottom right on the keypad).
•
IP address = IP you want the unit to have, determined by the GISO/NEC. Default
Gateway and Subnet Mask must be entered as well.
Primary DNS = DNS IP address of your garrison.
•
Secondary DNS = DNS IP address of your garrison.
•
© 2018 by Vermont Systems, Inc.
Notes: All numbers need to be zero filled. For Example: an entry of 10.2.100.30
would be entered as 010.002.100.030.
You can run ipconfig /all from a command prompt on the POS terminal to find the
gateway and primary DNS IP's needed for this unit.
Note: Make sure you press enter on the keypad and NOT the "Skip DNS" button on
the screen to complete DNS Entry.
Hardware Setup
RecTrac 10.3
9
Advertisement
