Advertisement
6
Now go into Device Assignments and find the applicable workstation name. Highlight the
current CREDITCARD device linked and click Modify Device. Note the auth receipt printer
settings, as this will be needed in the new CREDITCARD device in the next step. If applicable,
note the tip Transcode being used (only needed if this location takes tips). Click Done.
7
Highlight the current CREDITCARD device and click Remove Selected. Highlight the
PINPAD device and click Remove Selected.
© 2018 by Vermont Systems, Inc.
MX830 Credit Card Device
Note: If you see an AUTH-RCPT device linked to this workstation, auth receipts are
controlled by this device and the settings in the CREDITCARD device can be ignored.
RecTrac/CYMS Setup
RecTrac 10.3
17
Advertisement
