Hardware Setup
RecTrac 10.3
7
Click the Apply button when all of the settings are entered. You will see a pop-up that says,
"Reconfiguring Ethernet."
8
Click the Home link at the top of the screen and then click the Run App button.
9
The application will start the Preamble Process where you will have to enter the network
information again.
Device Preamble Process
The device must now register and VeriShield keys must be synched. This commonly is referred
to as the preamble process.
1
The MX925 will boot up to the "Configure Network Settings" screen as seen here:
8
© 2018 by Vermont Systems, Inc.