Advertisement
5
Create a new Pin Pad device. In Printer Device Maintenance click the Add button. Select
PINPAD as the New Type. Call the new device "POINT," with a Subtype of MX915. When you
click OK on the new device screen you will see the configuration screen for the new pin pad
device. Use "MX925" as the description and set the Signature timeout to 2 seconds to start.
© 2018 by Vermont Systems, Inc.
New MX915/MX925 CC Device
Note: If this location is going to have multiple MX925s tied to the same merchant
account, EACH MX925 will need a unique credit card device in RecTrac/CYMS.
Suggest numbering them A, B, C etc. as needed and creating them all at once.
Example: V501301A, V501301B, V501301C, etc.... Save the Credit Device. You will
finish the setup in a future step.
RecTrac/CYMS Setup
RecTrac 10.3
15
Advertisement
