Advertisement
RecTrac/CYMS Setup
RecTrac 10.3
On the Point Settings Screen, enter in the IP address of the MX925 you are connecting to.
Enter port numbers 5015 (primary) and 5016 (secondary). Enter in the "Serial Number" of
the unit as well, in the format shown in the screenshot:
Click Done to save the device settings. Then highlight the new CREDITCARD device that is
linked and click Modify Device. Navigate back to the "Point Settings" screen.
10 Now click Register with MX925. The following window will pop up:
© 2018 by Vermont Systems, Inc.
19
Advertisement
