100Base-T1/Ethernet Media Converter Hardware Setup; Figure 2-6 Connecting The Usb Cable To A Laptop Usb Port - Keysight APM0100E User Manual

2 Introduction

100BASE-T1/Ethernet Media Converter Hardware Setup

Refer to
setup.
PC
Figure 2-5
You can use different methods to connect an Automotive Ethernet cable to an
ECU. The following instructions are for devices that are already connected to the
100BASE-T1/Ethernet Media Converter with its BroadR-Reach (100BASE-T1)
cable attached.
1 Remove Components from Package. Take out the 100BASE-T1/Ethernet
2 Connect USB Cable to PC or USB Hub. Attach the larger USB connector on
Figure 2-6
18
Figure 2-5 for the 100BASE-T1/Ethernet Media Converter hardware
USB Cable
Ethernet Cable
100BASE-T1/Ethernet Media Converter Hardware Setup
Media Converter, Ethernet cable, and USB cable from the 100BASE-T1/
Ethernet Media Converter package.
the USB cable to an open USB port on a PC or a USB hub shown in
Connecting the USB Cable to a Laptop USB Port
Keysight APM0100E 100BASE-T1/Ethernet Media Converter User Guide
100BASE-T1/
Ethernet Media
BroadR-Reach
Converter
(100BASE-T1)
Cable
Figure 2-6.